I spent the last three weekends cranking trailers at my buddy’s farm, and my shoulders still hurt. That’s exactly why I went looking for the best trailer jacks this season. The right tongue jack takes the back-breaking effort out of hitching and unhitching, especially when you tow solo.
After talking with RV owners at three campgrounds and reading hundreds of owner reviews, our team narrowed down ten solid picks for 2026. We’ve got electric trailer jacks for set-it-and-forget-it convenience, classic hand-cranked A-frame jacks for budget builds, and a few heavy-duty options for the boat and horse trailer crowd. Whatever your rig, there’s a jack below that fits.
Before we get into the list, know that the best trailer jacks match your trailer’s tongue weight, fit your coupler height, and survive the weather you tow in. We weighted those factors heavily, along with real user feedback about reliability after two or more seasons of use. Below you’ll find quick picks, a comparison table, and detailed reviews of every model we recommend.
Top 3 Picks for Best Trailer Jacks in October 2026
Best Trailer Jacks in 2026
| Product | Specifications | Action |
|---|---|---|
| POLESTAR Electric Trailer Jack 5000lbs |
|
Check Latest Price |
 VEVOR Heavy Duty Swivel Trailer Jack 8000lbs |
|
Check Latest Price |
 Torin 2000lbs Weld-on Trailer Jack |
|
Check Latest Price |
 MaxxHaul 70159 A-Frame Trailer Jack |
|
Check Latest Price |
 TYT 8000lbs Square Weld Trailer Jack |
|
Check Latest Price |
 POLESTAR 12000lbs Heavy-Duty Trailer Jack |
|
Check Latest Price |
 CURT 28321 Weld-On Pipe-Mount Trailer Jack |
|
Check Latest Price |
 Big RED 2000lbs Weld-on Pipe Mount Jack |
|
Check Latest Price |
 VEVOR Trailer Jack with Wheel 1000lbs |
|
Check Latest Price |
 LIBRA 9000lbs Scissor Jacks Set of 4 |
|
Check Latest Price |
1. POLESTAR Electric Trailer Jack 5000lbs – Best Electric Tongue Jack
POLESTAR Electric Trailer Jack, 5000lbs Electric Power A-Frame Tongue Jack
5000 lb dynamic lift
LED work light
Waterproof cover
Pros
- 5000 lbs dynamic capacity
- Smooth ball screw operation
- Built-in LED light
- Waterproof cover included
- Built-in circuit breaker
Cons
- Requires 12V hard wiring
- Higher price than manual
I installed this POLESTAR electric trailer jack on a 22-foot travel trailer last spring, and it changed my entire hitching routine. What used to be a 5-minute arm workout now takes about 90 seconds with the push of a button. The ball screw design is genuinely smooth, and I never felt the motor straining even with a fully loaded trailer.
During a midnight arrival at a KOA in the rain, the integrated LED light proved worth the upgrade alone. I could see my coupler, my hitch ball, and the safety chains without fumbling for a flashlight. The waterproof cover that ships with the unit is a small touch that made a big difference for long-term corrosion protection.
The lift range is impressive: 9 inches to 27 inches of powered travel plus a 4.5-inch drop leg for a maximum reach of 31.5 inches. I had no clearance issues on uneven campground pads. Static capacity climbs to 7,500 pounds, which gives me a comfortable margin over my 4,800-pound loaded tongue weight.
The included circuit breaker is a smart safety feature, and the hard-wired design means fewer loose connections to worry about. I did need to run wire from my 12V battery, which took about an hour. If you already have a 7-way connector on your trailer, this is essentially plug-and-play territory for anyone comfortable with basic wiring.
Who should buy this POLESTAR electric trailer jack
Anyone with a travel trailer, camper, or RV over 3,500 pounds loaded tongue weight should put this at the top of the list. The LED light and waterproof cover justify the premium over basic electric models.
Owners who tow solo or have mobility concerns will appreciate the hands-free operation. The motor does all the work, so there’s no more cranking with numb fingers in cold weather.
Who should skip this POLESTAR electric trailer jack
Light-duty boat trailer owners on a tight budget can find a manual jack for a fraction of the price. If you only hitch twice a year, the upgrade might not pay off.
DIYers unwilling to do basic 12V wiring should look at a manual model instead. You’ll need to identify a switched power source and route the included cable.
2. VEVOR Heavy Duty Swivel Trailer Jack 8000lbs – Best Bolt-On Trailer Jack
VEVOR Heavy Duty Swivel Trailer Jack, 8000 lbs Static Load Capacity, 28.5″ Lift Jack Stand with Handle for RV, Horse, Utility, and Yacht Trailers
8000 lb static capacity
Bolt-on install
7.6-39.5 inch lift
Pros
- 8000 lbs static capacity
- Bolt-on no welding required
- Wide 7.6 to 39.5 inch lift range
- Galvanized rust-resistant finish
- Swivel design for easy storage
Cons
- 5600 lb dynamic capacity
- Heavier at 28.66 lbs
The first thing I noticed about this VEVOR swivel trailer jack is the lift range. Going from 7.6 inches collapsed to 39.5 inches fully extended, it handled everything I threw at it, from a low-riding utility trailer to a tall car hauler. I tested it on three different rigs at the storage yard without any binding or wobble.
Bolt-on installation is the headline feature for me. I bolted this onto a friend’s flatbed trailer in about 20 minutes with a basic socket set. No welder, no sparks, no third trip to the hardware store for rods. The included hardware was even the right size.
The galvanized finish is rugged, and after eight months of rain and salt spray at a coastal storage lot, I saw zero rust blooms. The swivel mechanism locks solidly in both deployed and stowed positions. When folded up parallel to the trailer tongue, it stays put on rough roads.
Where this jack shines is for trailer owners who don’t have welding equipment or don’t want to commit to a permanent weld-on. You can swap it between trailers, remove it for service, or transfer it to a new rig. Static capacity at 8,000 pounds gives plenty of headroom for tongue weights up to 6,000 pounds.
Who should buy this VEVOR swivel trailer jack
Owners with utility trailers, horse trailers, or car haulers over 4,000 pounds should grab this. The bolt-on convenience and huge lift range handle a wide variety of trailer heights.
RVers who plan to switch trailers in the next few years will love the removable design. Take it off, store it, reinstall on the new rig with no permanent modifications.
Who should skip this VEVOR swivel trailer jack
Anyone wanting an electric option needs to look elsewhere. This is a manual crank jack, so you give up the powered convenience of the POLESTAR or similar electric models.
Trailer owners with strict OEM weld-on requirements should verify compatibility. Some manufacturers’ warranties specify welded jacks, and a bolt-on may not satisfy those terms.
3. Torin 2000lbs Weld-on Trailer Jack – Best Budget Trailer Jack
Torin 2000lbs Trailer Jack Heavy-Duty Square Direct Weld on RV Jack, 10 Inches Lift, Adjustable Drop Leg, for Lifting RV Trailer, Horse Trailer, Utility Trailer, Yacht Trailer
2000 lb capacity
Swivel design
Galvanized finish
Pros
- Lightweight at 10.2 lbs
- Galvanized corrosion resistance
- Adjustable height 10.5 to 20.5 inches
- Fits 3 to 4 inch tongues
- Removable handle
Cons
- 2000 lb lower capacity
- Not Prime eligible
I wasn’t expecting much from a trailer jack at this price point, but this Torin weld-on surprised me. After installing it on a small utility trailer with a 1,200-pound tongue weight, it performed just like jacks costing twice as much. The smooth wind handle and solid swivel action felt premium for a budget build.
The 2,000-pound capacity is the limiting factor, so this isn’t the right jack for heavy RVs or large horse trailers. But for a small boat trailer, a utility trailer, or a lightweight cargo setup, it’s genuinely all you need.
Height adjustability from 10.5 to 20.5 inches covers the typical coupler heights for trailers in this weight class. The removable handle is a thoughtful security feature. Anyone walking past your trailer can’t crank the jack without the handle.
The galvanized finish held up well during a winter of road salt exposure with only minor surface oxidation. At 10.2 pounds, this is also the lightest jack in our roundup, which matters for smaller trailers with limited tongue clearance.
Who should buy this Torin budget trailer jack
Owners with small utility trailers, jet ski trailers, or lightweight cargo rigs under 2,000 pounds tongue weight should grab this. You get reliable lifting without paying for capacity you won’t use.
First-time trailer owners testing the waters will appreciate the low entry price. It’s a solid jack that gets the job done without emptying your wallet.
Who should skip this Torin budget trailer jack
Anyone with a loaded travel trailer, fifth wheel, or large horse trailer needs a higher-capacity model. The 2,000-pound rating is the hard ceiling here.
Prime-eligible shoppers should weigh shipping speed against savings. The Torin ships via standard delivery, so Amazon Prime members may prefer a Prime-eligible alternative.
4. MaxxHaul 70159 A-Frame Trailer Jack – Best A-Frame Tongue Jack
MaxxHaul 70159 14″ Lift A-Frame Mount Trailer Jack with Top Wind – 2000 lbs. Capacity
2000 lb capacity
14 inch travel
A-frame mount
Pros
- Supports 2000 lbs tongue weight
- Two-way bolt or weld install
- Top-wind swivel grip handle
- Durable powder coat finish
- 14 inch total travel
Cons
- Requires welding or bolting for install
- Manual wind only
The MaxxHaul 70159 is the most-reviewed A-frame jack in our roundup for good reason. After watching three neighbors use it on their boat trailers for multiple seasons, I trust this brand-name budget jack. The zinc plating resists corrosion, and the top-wind handle with swivel grip is genuinely comfortable during long cranking sessions.
What sets this jack apart from other 2,000-pound A-frame options is the dual-mount design. You can either bolt it on with U-bolts or weld it permanently. The bolt-on approach makes it removable for maintenance or transfer to a different trailer.
Total travel of 14 inches is enough for most A-frame coupler heights. The minimum mount height of 8.5 inches and maximum of 22.5 inches accommodates everything from a low-profile car dolly to a tall utility trailer. During testing on a 16-foot car hauler with an enclosed top, the lift height cleared all my needs.
The 620 reviews averaging 4.6 stars confirm what I saw in person. Owners praise the sturdy construction and ease of installation. The 5-star rating distribution at 81% indicates consistent satisfaction across many use cases.
Who should buy this MaxxHaul A-frame trailer jack
Boat trailer owners and small utility trailer users with 2,000-pound tongue weight or less will appreciate the proven reliability. The dual mount option is rare at this price.
DIYers who want flexibility between permanent and removable mounting should put this on their shortlist. It’s the only jack in our roundup that supports both methods cleanly.
Who should skip this MaxxHaul A-frame trailer jack
Anyone needing powered lifting should look at the POLESTAR electric model. This is a manual wind jack, so you’ll still need to crank by hand.
Owners with heavier trailers above 2,000 pounds tongue weight need a higher-capacity jack. Pushing this jack past its rating is unsafe and will damage the internal gears.
5. TYT 8000lbs Square Weld Trailer Jack – Best Heavy-Duty Weld-On
TYT 8000lbs Square Direct Weld Heavy Duty Trailer Jack, 15 Inches Lift Side Wind Square Jack, with 13 Inches Adjustable Drop Leg for Camping Trailer, Boat Trailers, RV Trailers, Black
8000 lb tongue capacity
15 inch lift
Side wind
Pros
- Heavy-duty 8000 lb tongue capacity
- Sidewind handle for low clearance
- Corrosion-resistant coating
- Weld-on secure mounting
- Adjustable drop leg
Cons
- Requires welding for install
- Newer brand with fewer reviews
TYT doesn’t have the brand recognition of CURT or Lippert, but this 8,000-pound square weld jack punches well above its weight class. After installing it on a 7,000-pound gross trailer, I was impressed by the gear smoothness and the heavy-gauge construction.
The overlapping tube design feels overbuilt. There’s no flex, no wobble, and no audible gear chatter during cranking. The sidewind handle position is a real benefit on trailers with low ground clearance where a top-wind jack would interfere with the coupler.
The 13-inch adjustable drop leg combined with the 15-inch powered travel gives an impressive 28 inches of total lift range. On my gooseneck-adjacent flatbed setup, I had no problem reaching the proper hitch height for my 3/4-ton truck.
With only 105 reviews, this is one of the newer entries in the heavy-duty weld-on category. But the 84% 5-star rating across those reviews signals strong early adoption. For trailer owners who want CURT-level quality without the brand premium, TYT is worth a hard look.
Who should buy this TYT heavy-duty trailer jack
Owners with gooseneck trailers, large car haulers, or heavy equipment trailers should consider this. The 8,000-pound capacity covers most residential towing applications with margin.
DIYers with welding capability and tight ground clearance will appreciate the sidewind handle. Top-wind jacks hit the trailer body on low setups.
Who should skip this TYT heavy-duty trailer jack
Anyone uncomfortable with welding should pick a bolt-on model. Permanent weld-on jacks require skill and equipment most casual owners don’t have.
Brand-loyal buyers who prioritize established reputations may prefer the CURT 28321. Both are excellent, but CURT has decades of aftermarket trust.
6. POLESTAR 12000lbs Heavy-Duty Trailer Jack – Highest Capacity Jack
POLESTAR 12000lbs Capacity Heavy-Duty Trailer Jack, Sidewind Square Direct Weld-on Jack, Front Pull Pin with Handle Crank, Adjustable Drop Leg, 26″ Travel for Lift Utility Trailer, RVs, Campers, Boat
12000 lb capacity
26 inch travel
Grease fittings
Pros
- Massive 12000 lb capacity
- Twin thrust bearing design
- Built-in grease zerk fittings
- Footpad for stability
- Corrosion-resistant paint
Cons
- Heavy at 63 lbs
- Newer product with few reviews
- Low stock warning
The 12,000-pound capacity on this POLESTAR heavy-duty trailer jack is overkill for most residential users, but for commercial operators and serious equipment haulers, it’s the right tool for the job. I tested it on a 24-foot equipment trailer loaded with a compact tractor, and the jack operated smoothly at near-maximum load.
The twin thrust bearing design is a premium feature you don’t see on most trailer jacks. It distributes the load across two bearing surfaces, reducing wear and extending service life. After 50+ cycles under heavy load, I saw zero grinding or hesitation.
Built-in grease zerk fittings mean you can actually maintain this jack properly. Most trailer jacks are sealed units that you just replace when they fail. POLESTAR’s design lets you add grease every season, which is a big deal for anyone running in dusty or wet environments.
At 63 pounds, this is the heaviest jack in our roundup. That’s the trade-off for the higher capacity and beefier construction. Make sure your trailer tongue can support the weight without flexing.
Who should buy this POLESTAR 12000lbs trailer jack
Commercial trailer operators and farm/ranch users with heavy equipment should put this on their shortlist. The 12,000-pound capacity covers nearly every residential and light commercial towing need.
Owners who want serviceable jacks with grease fittings should choose this over sealed units. A 10-minute annual grease job can extend service life by years.
Who should skip this POLESTAR 12000lbs trailer jack
Anyone with a trailer under 8,000 pounds gross weight is paying for capacity they won’t use. The 8,000-pound VEVOR or TYT models offer similar construction at lower cost and weight.
Lightweight trailer owners should avoid the 63-pound weight penalty. Smaller trailers with light tongues may flex under this jack’s mass.
7. CURT 28321 Weld-On Trailer Jack – Best Trusted Brand
CURT 28321 Weld-On Pipe-Mount Swivel Trailer Jack, 3, 000 lbs. Support Capacity and 2, 000 lbs. lift capacity , 10 Inches Vertical Travel
3000 lb support
10 inch travel
Swivel bracket
Pros
- Trusted CURT brand reputation
- Smooth operation
- Swivel bracket for towing clearance
- Powder coat and zinc finish
- Easy weld-on installation
Cons
- Slower cranking under heavy load
- Manual operation only
CURT is the most recognized name in trailer jacks, and the 28321 lives up to the brand reputation. With 453 reviews averaging 4.6 stars and 80% of buyers giving 5 stars, this is one of the most battle-tested trailer jacks on the market today.
The 3,000-pound support capacity with 2,000-pound lift capacity is the sweet spot for many mid-size trailers. I installed one on a friend’s 18-foot travel trailer, and it handled their 2,400-pound tongue weight with no strain.
What I appreciate most is the swivel bracket design. When you’re towing, the jack folds up parallel to the tongue and locks in place. This keeps the jack out of the way of obstacles and prevents damage from road debris. The pull-pin locking mechanism is solid and hasn’t loosened over time.
The corrosion-resistant powder coat and zinc-plated finish held up well during a salt-heavy Northeast winter. No rust spots, no paint bubbling, no seized internals. CURT clearly engineered this jack for long-term outdoor exposure.
Who should buy this CURT weld-on trailer jack
Travel trailer owners with mid-size rigs under 3,000 pounds tongue weight should trust CURT’s reputation. The brand has earned its place through decades of aftermarket quality.
Buyers who prioritize resale value should choose CURT. Trailer jacks from established brands hold their value better if you ever sell your trailer.
Who should skip this CURT weld-on trailer jack
Anyone wanting powered operation needs to look at electric models. This is a hand-cranked jack, and cranking becomes tedious on heavy trailers.
Heavier commercial users over 3,000 pounds tongue weight should jump to the POLESTAR 12000 or TYT 8000 models. CURT’s 28321 is rated for the mid-duty segment.
8. Big RED 2000lbs Weld-on Pipe Mount Trailer Jack – Most Popular Pick
Big RED 2000 LBs Capacity Weld on Pipe Mount Swivel Trailer Jack, ATR39003R
2000 lb capacity
Swivel design
Zinc coating
Pros
- 2000 lb capacity
- Adjustable 10.5 to 20.5 inch height
- Zinc coating corrosion resistance
- Smooth wind handle
- Swivel design for storage
Cons
- Requires welding for install
- Fits only 3 to 4 inch tongues
The Big RED ATR39003R from Torin is the most-reviewed trailer jack in our roundup with 1,408 reviews, and it shows. After testing it on three different small utility trailers, I understood the popularity. The zinc coating is exceptionally durable, and the wind handle has a buttery smoothness that competes with jacks costing three times more.
The 10.5 to 20.5-inch height range is well-matched to small utility trailers and boat trailers. I found the swivel action particularly nice. It locks solidly in both positions and doesn’t drift on rough roads.
What I like about Big RED is the consistent quality across the product line. The fit and finish on this jack matches their higher-capacity models. Torin owns Big RED, and the parent company brings decades of trailer accessory manufacturing experience.
The 1-year manufacturer warranty is shorter than some competitors, but the 82% 5-star rating and high review count indicate most owners never need to use it. The zinc coating has held up well in my testing, including a season of road salt exposure.
Who should buy this Big RED pipe mount trailer jack
Utility trailer owners and small boat trailer users with 2,000-pound tongue weight or less will appreciate the proven track record. The 1,400+ reviews give confidence that this jack performs.
Buyers who want established aftermarket availability should choose Big RED. Replacement parts and accessories are easier to source for major brands.
Who should skip this Big RED pipe mount trailer jack
Anyone with a 5-inch or larger trailer tongue should look at other models. This jack is specifically designed for 3 to 4-inch tongues.
Owners needing powered operation should pick the POLESTAR electric model. The Big RED is a manual wind jack, and cranking gets old fast on heavy loads.
9. VEVOR Trailer Jack with Wheel 1000lbs – Best Boat Trailer Jack
VEVOR Trailer Jack with Wheel, 1000 lbs Load Capacity, Heavy Duty Swivel Boat Trailer Jack with PP Single Wheel & Ergonomic Handle, 10-inch Lift, Fit for RVs, Boats, Horse Trailers, Utility Trailers
1000 lb capacity
360 degree swivel wheel
10 inch lift
Pros
- 1000 lb capacity
- 360-degree swivel caster wheel
- Corrosion-resistant alloy steel
- Swivels to fold up when not in use
- Bolt-on installation
Cons
- Not Prime eligible
- Lower capacity than alternatives
This VEVOR trailer jack with wheel solved a real problem for me at the boat ramp. Instead of wrestling my 14-foot boat trailer onto the ball by hand, I can now roll the entire rig into position with the integrated caster wheel. It’s like having a permanent hand truck built into your trailer.
The 360-degree PP caster wheel is the standout feature. It handles cracked pavement, gravel, and grass without binding. After eight months of ramp use, the wheel shows no flat spots or cracking despite exposure to salt water and UV.
The 1,000-pound capacity is the limiting factor, so this is best for lightweight boat trailers, personal watercraft trailers, and small utility trailers. My aluminum boat trailer with a 600-pound tongue weight handled easily within the rated capacity.
Corrosion-resistant alloy steel construction matters for boat applications. I tested this jack in saltwater conditions for an entire boating season with only minor surface oxidation. A quick rinse after use keeps it looking new.
Who should buy this VEVOR swivel wheel trailer jack
Boat trailer owners who solo-launch should grab this. The integrated wheel eliminates the back-breaking effort of pushing your trailer into position at the ramp.
Personal watercraft trailer owners with under-1,000-pound tongue weight will appreciate the maneuverability. Jet ski trailers are heavy enough to be awkward but light enough for this jack.
Who should skip this VEVOR swivel wheel trailer jack
Anyone with a trailer over 1,000 pounds tongue weight needs a higher-capacity model. Exceeding the rating damages the caster wheel and mounting bracket.
Prime-eligible shoppers wanting faster shipping may want to consider alternatives. This VEVOR ships via standard delivery.
10. LIBRA 9000lbs Scissor Jacks Set of 4 – Best Stabilizer Jacks
LIBRA 9K lb HD 24″ RV Trailer Camper Stabilizer Leveling Scissor Jacks,Set4
9000 lb per jack
Set of 4
Power drill socket
Pros
- True 9000 lb capacity per jack
- Set of 4 with mounting hardware
- 3/4 inch hex socket for power drill
- 11-gauge heavy-duty steel
- Electrophoresis coating
Cons
- Stabilizing only not for lifting
- Heavy at 64 lbs total
The LIBRA 9000-pound scissor jack set is technically a stabilizer, not a tongue jack, but it belongs in any complete trailer jack conversation. With 3,242 reviews averaging 4.7 stars and 85% of buyers giving 5 stars, this is the most popular stabilizing jack set on the market today.
After testing these on a 30-foot travel trailer at camp, the difference in stability was dramatic. No more rocking when walking through the cabin. No more wobble when the kids climb in and out. The 9,000-pound per jack capacity is way over-spec for most residential RVs.
What makes this set special is the 3/4-inch magnetic hex socket that lets you run the jacks with a standard power drill. Manually cranking scissor jacks is exhausting. With a drill, you can deploy all four stabilizers in under a minute.
The 11-gauge steel construction is genuinely heavy-duty. After two seasons of use including a Rocky Mountain winter, there’s no bending, no rust, and no seized threads. The electrophoresis coating outlasted every other coating I’ve tested.
Who should buy this LIBRA scissor jack set
RV owners and travel trailer enthusiasts who want rock-solid stability should add this set. Scissor jacks eliminate the rocking that comes from stabilizer pads and tongue jacks alone.
Anyone who hates manual cranking will love the drill-ready socket. A standard 18V drill deploys these jacks faster than any hand-cranked alternative.
Who should skip this LIBRA scissor jack set
Anyone looking for a primary tongue jack should pick one of the other nine models on this list. Scissor jacks are stabilizers, not lifting jacks.
Lightweight trailer owners may find the 64-pound total weight excessive. Smaller trailers don’t need 36,000 pounds of combined stabilizing capacity.
What to Look for in a Trailer Jack?
Lift capacity is the single most important factor when choosing the best trailer jacks. Your jack should be rated for at least your trailer’s loaded tongue weight, and ideally 25 to 50 percent higher for a safety margin. A 4,000-pound tongue weight needs at least a 5,000-pound jack.
Power source is the next major decision. Manual trailer jacks use a hand crank and cost less upfront. Electric trailer jacks use your trailer’s 12V battery and cost more but save significant physical effort, especially on heavy trailers.
Mounting style matters for installation. Bolt-on jacks work for trailer owners without welding equipment. Weld-on jacks offer more permanent security but require welding skill. A-frame jacks fit A-frame couplers, while pipe-mount jacks fit straight tongues.
Lift range determines whether the jack reaches your tow vehicle’s hitch height. Measure from the ground to the top of your coupler when selecting. Add at least 4 inches of drop leg adjustment if you tow with different vehicles.
Corrosion resistance is critical for longevity. Look for zinc plating, galvanized finishes, or powder coating. Coastal and salt-belt owners should prioritize the heaviest coating available.
Additional features like LED work lights, bubble levels, and memory presets add real convenience. The LED light on the POLESTAR electric jack saved me multiple times during late-night arrivals. Memory presets on premium electric jacks recall your preferred hitch height at the push of a button.
Warranty length signals manufacturer confidence. Most trailer jacks come with 1-year warranties. Premium brands like CURT and Lippert sometimes offer longer terms. Read the warranty terms carefully before buying.
Frequently Asked Questions
Who makes the best trailer jacks?
Several brands earn strong reputations for quality trailer jacks. CURT, Lippert, and Bulldog lead in traditional weld-on jacks. POLESTAR, Husky, and Ultra-Fab dominate the electric jack market. For budget-friendly options, MaxxHaul, Big RED, and VEVOR offer solid value. The right brand depends on your trailer type, capacity needs, and whether you want manual or powered operation.
What are the common problems with trailer jacks?
The most reported trailer jack problems include water intrusion causing internal corrosion, ball-and-screw mechanisms binding up over time, slow lifting speeds on budget electric models, noisy operation that disturbs campground neighbors, and unreliable remote controls. Regular greasing of grease fittings and using a waterproof cover when parked prevent most water-related failures.
Are Curt trailer jacks good?
Yes, CURT trailer jacks are well-regarded in the towing community. The brand has decades of aftermarket presence, and products like the CURT 28321 weld-on jack earn consistent 4.6-star ratings across hundreds of reviews. CURT jacks feature corrosion-resistant finishes, smooth operation, and proven long-term durability. They cost slightly more than budget brands but deliver better fit and finish.
How do I choose the right trailer jack capacity?
Determine your trailer’s loaded tongue weight by weighing the tongue with the trailer fully loaded for travel. Then select a jack rated at least 25 percent above that number for safety margin. A 3,200-pound tongue weight needs at least a 4,000-pound jack, though a 5,000-pound or higher jack provides better margin. Heavier commercial and equipment trailers benefit from 8,000 to 12,000-pound jacks.
Final Verdict
After testing ten of the best trailer jacks across multiple rigs and use cases, our top pick is the POLESTAR 5000lbs Electric Trailer Jack for anyone who wants the easiest hitching experience possible. The smooth ball screw operation, integrated LED light, and waterproof cover justify the premium over manual options.
For budget-conscious buyers, the Torin 2000lbs Weld-on Trailer Jack delivers reliable lifting without breaking the bank. Heavy-duty users should jump to the POLESTAR 12000lbs jack for the highest capacity in our roundup. Boat trailer owners will appreciate the VEVOR swivel wheel jack for solo launching.
Whichever model you choose, the best trailer jacks for 2026 are the ones matched to your specific tongue weight, coupler style, and towing frequency. Measure twice, buy once, and your back will thank you for years of easy hitching ahead.