A patchy, striped lawn is usually an equipment problem, not a fertilizer problem. A drop spreader puts every granule directly beneath the hopper with no fan pattern to guess at, which makes it the right tool for lawn edges, flower beds, walkways and sloped ground. After comparing seven of the most reviewed machines side by side for 2026, these are the best drop spreaders for precise fertilizing.
We judged every spreader on the same five things: hopper capacity against your lawn size, how wide a clean band each pass lays down, how finely the flow control is graduated, what the tires do on uneven ground, and whether the hopper survives a season of fertilizer and ice melt. We also weighed the reviews that describe striping, gate drift and rust, because those are the failures that show up after the first season.
If your lawn is wide open and free of obstacles, the answer is probably a broadcast unit instead. We cover that comparison in our broadcast spreader guide, and it is worth reading before you commit to a drop model.
Table of Contents
Top 3 Best Drop Spreader Picks for Precise Fertilizing
VEVOR TC2032B Drop Spreader
- 50 lb hopper
- 18 inch width
- 10 drop settings
- 10 inch all-terrain wheels
Brinly P20-500BHDF-A
- Side deflector kit
- 50 lb rust-proof hopper
- Deflector flips up when not needed
- Enclosed gearbox
CHAPIN 8400C SureSpread
- 100 lb hopper
- Adjustable rotary gate
- Stainless steel frame
- Dual auger system
Best Drop Spreaders at a Glance in 2026
| Product | Specifications | Action |
|---|---|---|
| VEVOR TC2032B Drop Spreader |
|
Check Latest Price |
 Agri-Fab Tow Behind Drop Spreader |
|
Check Latest Price |
| Brinly P20-500BHDF-A Push Spreader |
|
Check Latest Price |
| CHAPIN 8400C SureSpread Turf Spreader |
|
Check Latest Price |
 Yard Commander 60 lb Push Drop Spreader |
|
Check Latest Price |
 At Home 75 lb Drop Spreader |
|
Check Latest Price |
 Lesco 101186 High Wheel Fertilizer Spreader |
|
Check Latest Price |
1. VEVOR TC2032B – Most Adjustable Drop Rate for Repeatable Passes
VEVOR Broadcast Spreader 50 lbs Capacity Drop Spreader with Hopper Grate | for Lawn & Garden Care, 18 in Spreading Width & 30 Adjustable Settings, 10 in All Terrain Tires for Seed, Fertilizer, Black
50 lb hopper
18 inch width
10 drop settings
10 inch all-terrain wheels
Pros
- Ten discrete drop-rate settings for repeatable metered bands
- 50 lb hopper cuts refills on a full lawn
- 10 inch all-terrain wheels handle gravel and snow
- Tool-free assembly and compact storage
- Most reviewed machine in the group with a 4.4 average
Cons
- 18 inch width is narrow so large lawns need many passes
- Some reports of calibration drift and frame wear
- Surface rust can develop on the powder-coated frame
This is the unit we keep coming back to because the rate dial has ten discrete positions rather than a coarse lever. On a metric product, that granularity is the whole game: it lets you back the gate off a notch to take the edge off a light application without guessing.
Capacity and width are well matched. A 50 lb hopper and an 18 inch swath mean a lawn under 5000 square feet gets one pass per strip, and the hopper empties fast enough that you are not carrying a heavy load across the yard.
The 10 inch wheels are the quiet advantage. They roll over uneven ground and packed snow without the digging in you get from small casters, which matters on the same pass where you are also trying to hold a straight line.
Assembly is tool-free and the whole thing folds down to a compact footprint, which matters more than it sounds if you store it in a garage already crowded with mower and mower bag. At 15.75 pounds empty it is a light frame to maneuver, and the 26.97 by 31.5 by 34.65 inch footprint means it fits against a wall rather than in the middle of it.
What you give up with this model
Eighteen inches is the narrowest published working width in the group, so fertilizing a quarter acre with this unit means a lot of walking and a lot of chances to drift out of line. If you have more than roughly 10000 square feet of open lawn, the pass count starts to cost you real time.
Owners also report occasional calibration drift and surface rust showing on the powder-coated steel frame with age, so it is not the unit to leave sitting outdoors through winter.
Who should buy it
This is the right pick for a homeowner with a small or awkwardly shaped lawn who wants a graduated flow control and a big enough hopper to finish in one session. It is also our pick for anyone feeding around beds and walkways on a regular basis, where the ten settings give you a usable low end that a two-position gate does not.
2. Agri-Fab Tow Behind – Acre-Scale Capacity
Agri-Fab Tow Behind Lawn and Garden Drop Spreader for Seed, Fertilizer, Salt and Ice Melt, 175 lb Capacity with 42 In Spread Width
175 lb hopper
42 inch drop width
About 40000 sq ft per fill
Seed salt and ice melt
Pros
- Largest working capacity here at 175 lb and 42 inches
- 42 inch band covers roughly an acre per fill
- Rustproof poly hopper on an alloy frame
- Built in Sullivan IL with a 3 year limited warranty
- Tow-behind so you never push a loaded hopper
Cons
- Tow-behind only so it cannot handle small walk-behind jobs
- Gate control is on and off rather than finely graduated
- Material can bridge and stick in the hopper
Everything about this spreader is sized for acreage. The 17 gallon hopper holds 175 pounds, and the 42 inch controlled width means a single fill covers roughly 40000 square feet. On a half acre property that is one pass set, not three.
The band is still a band. A gated drop control keeps material in a defined strip rather than a fan, so the same unit that feeds a large lawn can handle the strip along a driveway without washing product onto the concrete.
Construction is rustproof poly on an alloy steel frame with a universal hitch, a hopper and an on/off control in the box. It is assembled in Sullivan, Illinois and carries a 3 year limited consumer warranty, which is a real difference from the disposable-feeling machines at the low end.
Owners on large properties treat it as a year-round tool. Seed, fertilizer, weed control, salt and ice melt all run through the same hopper, and the tow-behind format means a tractor moves the load rather than your shoulders.
What you give up with this model
The gate is on and off rather than graduated, so precision comes from your pass discipline rather than from the dial. If you need a light half-rate pass next to a full-rate one, this is not the tool that makes that easy.
It also weighs 50.5 pounds empty and measures 33 by 50 by 28 inches, so loading it by hand and threading it between beds is awkward. Around 10 percent of ratings are one star, with material bridging in the poly hopper as the recurring theme.
Who should buy it
Buy this if you are feeding a half acre or more, or maintaining several properties, and you have a tractor or mower to hitch it to. The capacity-to-effort ratio is the strongest in the group, and nothing else here covers comparable ground per fill.
3. Brinly P20-500BHDF-A – Side Deflector Keeps Granules Off the Beds
Brinly P20-500BHDF-A Push Spreader with Side Deflector Kit and Hopper Grate, 50 lb. Capacity – Flat Black
50 lb rust-proof hopper
Side deflector kit
Deflector flips up when not needed
Enclosed gearbox
Pros
- Side deflector is the clearest edge-control feature in the group
- Deflector flips up so the same unit works as a normal push spreader
- Stainless steel shaft agitator and hardware
- Enclosed rust-resistant gearbox
Cons
- No published spread-width figure so pass planning takes trial
- Gate calibration drifts and needs rechecking after use
- 28.5 lb empty weight is heavy once loaded
The side deflector kit is the reason to look at this model. It redirects material flow toward one side of the hopper so the throw stops short of the band, which is exactly what you need running along a bed, a driveway or the edge of a pond.
When you do not need it, the deflector flips up and out of the way and the spreader behaves like a conventional 50 lb push unit. That dual behavior is unusual and it means one machine covers both the border work and the open lawn work.
Underneath, it is a well-built machine. The 50 lb heavy-duty rust-proof hopper sits on a fully enclosed rust-resistant gearbox, with a stainless steel shaft, agitator and hardware throughout. That rust-proof construction is the part that decides whether the machine is still working after a winter of salt and ice melt.
Simple calibration settings with controls you can reach from behind the handle mean you can adjust the rate mid-pass without stopping and walking around the machine.
What you give up with this model
No spread-width figure is published, so planning your passes is trial and error at first. You will find your rhythm after a session or two, but the first fertilizing job is a bit of guesswork on overlap.
Owners also report having to re-calibrate the gate over time, and at 28.5 pounds empty it is one of the heavier push frames here once you add a full hopper of fertilizer.
Who should buy it
This is our pick for lawns with lots of borders. If your property is a patchwork of beds, walks, drives and oddly shaped turf, the deflector buys you back more precision than any dial setting on another unit, and the stainless drivetrain handles ice melt season without complaint.
4. CHAPIN 8400C – Rotary Gate for Directional Accuracy on Big Lawns
CHAPIN 8400C 100-Pound Capacity Made in USA Professional SureSpread Turf Spreader with Stainless Steel Frame and Linkage, Enclosed Gearbox, 14-inch Tires, Rotary Gate – Fertilizers/Weed Control, Red
100 lb poly hopper
Adjustable rotary gate
14 inch tires
Stainless steel frame
Pros
- Rotary gate spreads one side the other or center on demand
- Stainless steel frame linkage and fasteners
- Flat and winged augers for clumping materials
- Enclosed gearbox keeps the gear train sealed
Cons
- Hopper leaves residual material at the bottom that must be tipped out
- Hand-drawn unclear instructions and about 45 minutes of assembly
- Nylon nuts loosen over time and need retightening
The adjustable rotary gate is a different mechanism from the sliding plate on most drop spreaders, and it is the reason this one earns a place here. You can throw the band toward one side, the other side, center, or a combination, so a single pass can cover a strip offset from the wheel track instead of always landing directly underneath.
On a large irregular lawn, that directional control is what stops you from fighting yourself at every turn. It is also the closest thing in this group to the manual deflector approach on a pro unit.
Build quality is the other story. A 100 pound one-piece polyethylene hopper sits on a stainless steel frame with stainless linkage and fasteners, and owners report the machine still looking new after several seasons of outdoor storage.
It also handles material variety unusually well. A flat auger and a winged drum auger are included, and the winged drum is for clumping minerals that would bridge in a plain agitator. The 14 inch tires carry the loaded machine across uneven ground without tipping.
What you give up with this model
The hopper does not funnel cleanly. Owners report roughly a cup or a few pounds that will not flow out and have to be tipped from the end, and it is only noticeable once the hopper is nearly empty, which is exactly when you are finishing a job.
Assembly is the other weak point. The instructions are hand-drawn and unclear, expect about 45 minutes, and some owners add their own washers and lock washers. Nylon nuts also loosen with use and need periodic tightening.
Who should buy it
This one suits a commercial operator or a large property owner who wants stainless hardware that handles year-round outdoor storage and a gate that can aim the band off to one side. Skip it for salt or ice melt, since the openings are not sized for it, and budget real time for the first assembly.
5. Yard Commander 60 lb – Lightest Frame With Never-Flat Tires
Yard Commander – 60 LB Walk-Behind Push Drop Spreader – Holds Up to 15,000 SQFT of Product – Great for Applying Fertilizer & Grass Seed – Adjustable Drop Rate & Composite Hopper
60 lb composite hopper
22 inch spread pattern
12 inch never-flat tires
13.4 lb empty weight
Pros
- Lightest frame in the group at 13.4 lb empty
- 60 lb composite hopper is easy to rinse clean
- 12 inch never-flat tires remove flat risk on rough lawn
- Adjustment lever arrives preassembled and factory adjusted
- Simple flow control lever on the push bar
Cons
- Gate and cable linkage are the most reported failure point
- Flow rate does not hold calibration between sessions
- 1 year limited warranty is the shortest coverage listed
The handling is the story. At 13.4 pounds empty, this is the frame you can lift with one hand and push across a slope without it running away from you, and the 12 inch never-flat tires mean you are not stopping to check pressure halfway through a job.
Flow control is a single lever on the push bar, which is about as simple as the mechanism gets. You adjust the drop rate while walking, and the adjustment lever arrives preassembled with a factory-adjusted cable, so there is no first-session setup project before you start.
Capacity is generous for a push unit. The 60 lb composite hopper covers up to 15000 square feet on a 22 inch spread pattern, and the composite material is easy to rinse out and resists fertilizer corrosion better than bare steel.
Note that actual capacity depends on material density, so a fluffy seed blend fills less weight than a dense granular fertilizer at the same volume.
What you give up with this model
This is the lowest-rated model in the group at a 3.0 average, with 32 percent one-star reviews, the heaviest negative share here. The gate and cable linkage are the most common failure point, and owners report re-adjusting flow calibration repeatedly because it does not hold.
The warranty is a 1 year limited warranty, the shortest listed. At 13.4 pounds empty with a steel frame and composite hopper, this is a spreader to buy expecting to service, not one to buy expecting to forget about.
Who should buy it
Buy it if weight and simplicity matter more than long-term precision, and your lawn is a mid-size property where a 22 inch pattern is workable. It is a reasonable first drop spreader for someone who wants the metered band, has a genuinely light frame to carry, and will rinse the hopper after each use.
6. At Home 75 lb – Steel Agitator and a Chart That Transfers
At Home 75 lb. Drop Spreader (me)
75 lb hopper
Holds 10000 sq ft of product
Galvanized steel agitators
Maintenance-free flow control
Pros
- Galvanized steel agitator breaks up clumps unlike plastic agitators
- One wheel drives the agitator so product stops flowing on turns
- Dispense chart closely matches a widely used competitor's numbers
- Wide solid wheels leave a track that makes passes repeatable
- Foam-padded handles and stiff steel flow control
Cons
- Flow adjustment is coarse and jumps from nothing to a heavy surge
- Wheels can jam at lower settings with dry material
- Some reports of internal steel rusting within a season
Two details set this apart from most push drop spreaders at this size. The agitator is galvanized steel rather than plastic, so it breaks up clumped material instead of flexing around it. Just one wheel drives the agitator, so the flow stops when you turn that way and product does not dump at the corner.
That second point sounds minor until you have chased a pile of seed dumped at the end of every pass. It is the difference between a tidy job and a cleanup.
The dispense chart is the other practical win. Owners report that the numbers line up closely with the settings a widely used competitor drop spreader recommends, so dial numbers transfer between machines instead of sending you back to a pan test with a different product.
Wide solid wheels leave a clear track impression in the turf, and the next pass lines up against it. On a 75 lb hopper holding 10000 square feet of product, alignment is the difference between a uniform feed and visible banding.
What you give up with this model
The flow adjustment is coarse. Settings jump from nothing coming out to a heavy surge rather than stepping gradually, so fine half-rate work takes trial and error and a willingness to re-check the gate.
Owners also report wheels jamming at lower flow settings with dry granular material, and multiple reports of internal steel mechanism rusting within a season even when stored in a dry garage. Wheel spindle quality is another recurring complaint, and at 29.1 pounds empty the handle height is short for taller users.
Who should buy it
This suits an overseeding or patch-repair job where the steel agitator handles clumped seed blends and the single-wheel drive keeps the corner clean. It is a good fit if you already know your dial numbers from another machine and want them to carry over.
7. Lesco 101186 – Commercial Gearbox and Manual Deflector
Lesco High Wheel Fertilizer Spreader with Manual Deflector – 101186 – Replaces 091186
80 lb hopper
Manual deflector kit
Enclosed 5:1 gearbox
High-wheel chassis
Pros
- Highest average rating in the group at 4.5 with 75 percent five star reviews
- Manual deflector is a direct hands-on edge control mechanism here
- 80 lb hopper on a high-wheel chassis rolls over rough ground
- Enclosed 5:1 commercial gearbox holds calibration
- The unit Lesco uses for its own turf operations
Cons
- Manual deflector has to be worked by hand so it is not hands free
- Some assembly required with instructions rather than illustrations
- Replacement parts and service are less accessible than mainstream brands
This is the commercial end of the list, and the gearbox is the reason. An enclosed 5:1 gearbox in a commercial high-wheel chassis is a different durability class from the exposed plastic gearing most home spreaders use, and owners of commercial spreaders consistently report that the calibration holds season after season.
The 80 lb hopper carries a substantial load, and the high-wheel chassis rolls over rough ground without digging in the way a low caster frame would.
The manual deflector kit is one of the most direct edge controls in this roundup. Rather than relying on where the openings sit, you physically cut the throw at borders and beds while you walk, which is the mechanism pro operators reach for when the band has to stop exactly where the turf stops.
It is also the least convenient. The deflector is worked by hand, so it is not hands-free precision, and you are managing one more control while walking a loaded machine.
What you give up with this model
The obvious drawback is what it asks of your budget, and it is a large step up from everything else here. Only 68 ratings are on file, a small sample, so the review history is thinner than the rest of the group despite the highest average at 4.5.
Replacement parts and service are less accessible than for mainstream brands, and some assembly is required with instructions included rather than illustrated. The manual deflector also takes practice to work smoothly.
Who should buy it
This belongs to lawn care operators and serious enthusiasts who spread weekly and want a machine that outlives several budget spreaders. The gearbox and deflector combination is the most hands-on setup in the group, and for daily commercial use that level of control pays for itself.
How to Fertilize Precisely Without Striping Your Lawn
Striping is the loudest complaint in lawn care forums, and it is almost always a pass alignment problem rather than a bad spreader. Light and dark bands mean some strips got more product than others, and on a drop spreader that happens when passes overlap too much, drift out of line, or change walking pace.
Start with the perimeter. Walk the outside edge of the lawn first with the gate open, then walk that same loop back with the gate closed. You now have a clean border and a defined edge to align your interior passes against.
Run interior passes at a consistent width. Pick a strip width you can judge by eye, usually narrower than the full spread width, and stick to it. On the VEVOR that means overlapping the 18 inch band by roughly a third on each pass.
Slow down and shorten the stride. Flow rate is tied to wheel rotation, not to how fast you cover ground. Walking faster than you think means less product per foot, which is where faint stripes come from.
Cross at 90 degrees. Once the top-to-bottom passes are down, run a set side to side over the same ground. The second direction fills the light gaps left by the first set and evens out any drift.
Back the dial off for the last pass. If you still see banding, drop one setting and run a light pass over the same strips rather than adding more product to the heavy ones.
Rinse and re-check the gate. Fertilizer residue narrows the opening. Clean the holes and the gate plate between products, since a gate calibrated for seed will over-feed granular fertilizer.
Users on lawn care forums report that a used, quality spreader regularly outperforms a cheap new one, and that well-built machines from decades past can still hold calibration. That is a real signal about the metal gearing and gate linkage that separates the models above from the disposable end of the market.
How to Calibrate a Drop Spreader With a Pan Test
Dial numbers are brand specific. A bag of fertilizer lists settings for named spreaders, and if your model is not on that chart, the number is meaningless. A pan test takes about ten minutes and gives you the actual pounds per 1000 square feet your machine delivers.
Find a flat, clean patch of pavement roughly 10 feet by 10 feet and sweep it clear.
Set the dial to the number you believe is correct, or start a notch below the bag recommendation.
Place a catch pan under the drop openings, or weigh a plastic tub first and then again after.
Walk the machine 20 feet at your normal pace with the gate held open the whole time.
Weigh what you collected and subtract the empty container weight.
Compare against the target. A 10 by 10 test area is 100 square feet, so multiply your result by 10 to get pounds per 1000 square feet, then match that to the rate on the bag.
Adjust and repeat. If you under-fed, move up a setting. If you over-fed, move down. Test again before you touch the whole lawn.
For seed rather than fertilizer, weigh the same way against the bag’s seeding rate. Coarse granules flow differently from fine ones, so a gate calibrated for a dense granular product will be off with a lightweight seed blend, and the reverse is also true.
How to Choose a Drop Spreader for Your Lawn
Match hopper capacity to lawn size. A 50 lb hopper covers a small lawn comfortably, 60 to 80 lb suits a mid-size property, and you want 100 lb or more past half an acre. Coverage per load depends on the band width and your application rate, so check the square foot figure the manufacturer lists rather than assuming. The Agri-Fab is the clearest example, covering roughly 40000 square feet per fill at a 42 inch width.
Look at band width, not just hopper size. Wider bands mean fewer passes and fewer chances to drift. The Agri-Fab at 42 inches and the CHAPIN with its rotary gate cover ground far faster than the 18 inch VEVOR, so a bigger hopper does not help if the width forces you to walk twice as many strips.
Check how finely the flow is graduated. Ten discrete settings give you far more control than a two-position gate. This matters most for overseeding and light topdressing, where you are dialing a low rate and small changes make a visible difference.
Pick tires for the ground. Never-flat tires remove flat risk but transmit more shock into the frame on rough turf. Air-filled tires cushion uneven ground and spread the load, which matters on a sloped property or when you are pushing 100 pounds of product. All-terrain tires on the VEVOR sit between the two.
Think about corrosion before winter. Poly and composite hoppers handle fertilizer and ice melt better than bare steel. Stainless steel frames, shafts and hardware, as on the Brinly and the CHAPIN, resist the rust that owners of budget machines report within a season. If you will use the spreader for ice melt, rinse it every time.
Decide whether the edge control is mechanical or manual. A side deflector or rotary gate cuts the throw at the band edge. A manual deflector does it under your hand. Both work, but the manual version means you are managing a control while walking a loaded machine.
For a broader look at the other side of the aisle, our best broadcast spreaders guide covers the wide-pattern options that cover open ground faster.
When to Skip a Drop Spreader
A drop spreader is the wrong tool for a wide open lawn with no beds, walks or borders. The band is narrow, so you will make many more passes, and the time saved by a fan-pattern broadcast unit on clean open turf far outweighs the precision you are not using. If that describes your property, read our broadcast spreader roundup before you buy.
A handheld spreader is also usually enough if your job is spot treatment, a small patch repair, or feeding a strip around a tree. Below roughly 2000 square feet of actual work area, a handheld spreader is more efficient than a push model.
Do not spread a herbicide with a drop spreader unless the product label specifically lists drop application as approved, since a label violation is a real liability. And do not use the CHAPIN for salt, since its openings are not sized for it.
Maintenance: Keeping Fertilizer and Ice Melt Out of Your Hopper
Rinse the hopper and the gate plate after every application, especially when switching from seed to granular fertilizer or to ice melt. Dried residue narrows the opening and quietly changes your calibration.
Hose the underside out so you can see the openings clearly, then run the gate open over a bucket to flush anything still lodged. Dry it fully before storage, and pay attention to the steel parts. Owners report internal rust within a season on machines stored in a dry garage, so a light oil on the shaft and linkage is cheap insurance.
Store it off the ground, and if the frame is powder-coated steel rather than stainless, keep it under cover. The difference between the stainless-framed models above and the coated steel ones shows up within a few seasons of outdoor life.
Frequently Asked Questions
Are drop spreaders any good?
Yes, for lawns with edges, beds, walkways or slopes. A drop spreader releases material straight down beneath the hopper, so nothing lands on surfaces it should not and the band width is narrow and repeatable. The tradeoff is time: you make many more passes than with a broadcast unit, and the flow gate has to be calibrated or the result will be uneven.
Which is better, a broadcast or drop spreader?
A drop spreader is better for small, irregular or bordered lawns, for keeping product off flower beds, driveways and pools, and for herbicide and lime applications. A broadcast spreader is better for wide open turf because a fan pattern covers far more ground per pass. Most owners end up owning both eventually.
What are the disadvantages of using a drop spreader?
The main drawbacks are speed and alignment. A narrow band means far more passes across the lawn, work takes longer than broadcasting, and drifting out of line shows up as visible light and dark stripes. Flow control also has to be calibrated for each product, and a gate cleaned for seed will over-feed granular fertilizer.
What setting should I use on my drop spreader to spread grass seed?
Dial numbers are brand specific, so the chart on the bag only works if your model is listed on it. Start one notch below the recommended number, then run a ten minute pan test on clean pavement and weigh what comes out. Adjust until your measured pounds per 1000 square feet matches the seeding rate on the bag.
How do I stop my drop spreader from leaving stripes?
Walk the perimeter first, then run interior passes at a consistent strip width with a small overlap, at a steady walking pace. Finish with a second set of passes at 90 degrees to the first, which fills the light gaps and evens out drift. If banding remains, drop one setting and run a light pass over the same strips rather than adding more product.
Is a Lesco spreader worth the money?
Lesco builds commercial-grade units, and the 101186 pairs an enclosed 5:1 gearbox with a manual deflector for exact edge placement. Owners rate it highly, but the review base is small, the deflector has to be worked by hand, and parts and service are harder to reach than for mainstream brands. For weekly professional use the durability tends to justify it.
Conclusion
The best drop spreaders for precise fertilizing come down to lawn size and edge complexity. The VEVOR TC2032B is the all-round pick: ten discrete drop settings, a 50 lb hopper and the most reviews in the group. Choose the Brinly when borders are the problem, the CHAPIN when you want directional control on a large irregular property, and the Agri-Fab when you have half an acre or more and a tractor to pull it.
Whichever you pick, run a pan test before the first full pass, follow the perimeter first, and finish with a 90 degree cross pass. That technique does more for an even lawn than any dial setting on the machine. Check each listing for current details, and update your calibration whenever you change products.